Transcript:
Let’s take a look at how to remove the straps from your Fitbit Inspire, as well as install your new ones.
Let’s start by removing the straps you have currently installed.
Start by turning the Fitbit over so that the back of the device is facing you.
Next, you’ll notice that there are these small metal levers right where the strap connects to the device. Each lever is positioned closer to one edge of strap.
To remove one strap, use the edge of your fingernail to pull the lever away from the edge of the strap towards the middle. While the lever is pulled inwards, pull the strap away from the device at the same time. The strap will come loose from the device.
Repeat the process with the other strap, and you’ve now removed the strap from your Fitbit Inspire.
To install your new strap, we’ll start by taking the shorter piece, which often has the buckle on it, and positioning it near the top side of your Fitbit.
Notice the pin sticking out from the side opposite the lever. Insert this side of the pin into the small hole on the device.
Next, pull the lever inwards with your nail, and position the other corner of the strap into the notch of your Fitbit, and then release the lever.
Make sure both ends of the pin are securely locked in place, then repeat the process with the other piece of the strap.
Give both ends of the strap a gentle tug to make sure everything is secure and you’re all done.
